Raw Meal Ball Mill

Raw Meal Ball Mill is mainly used in grinding raw materials and final products in cement plant. It is also suitable for grinding various ores and other materials in the metallurgy, mine, chemical, construction and other industries.

Suitable enterprise type: cement plant
Output:21~210t/h
Effective volume:29.5~185 m3
Per machine power consumption:17~22kWh/t

Get solution and support:

I am interested in (*) , raw material is,
the production capacity is t/h, send email to (*).
Name: (*) Phone: Country:

  • Strong adaptability to raw material,large crushing ratio
  • Easy to adjust the size of the products
  • High wear resistance, impact resistant
  • More convenient operation
  • High gear bending strength
  • Good lubrication, reliable operation

Product Profile

Raw material ball mill, also called raw meal mill, is important grinding equipment in cement production process. After being crushed, the raw meal enters the raw material mill. The raw meal is grinded into fine powder by the motion and squeezing of steel balls. The raw material mill manufactured by Chaeng (Great Wall Machinery) can meet the raw material supply of 250~2500t/d cement production line.

Product characteristics

1. Less investment and quick benefit

Being a kind of very mature mill, raw material mill is widely used in cement industry. It is cheap and suitable for cement plant with less investment to put into production very soon.

2. Special streamline design

The big end cover and discharge system of the raw material mill adopt special streamline design, which reduces the air resistance and increases the effective volume, so it is easy to discharge and the yield of raw meal improves.

3. More effective structural design

The raw material mill is single-chamber, and the liner in the mill adopts modular design, using different liner structures at different stages of the mill, so the grinding efficiency improves significantly.

4. Free and flexible working manner

The raw material ball mill can adopt edge drive or center drive according to different models, so the configuration is very flexible. It can not only be used to dry process production, but also can be used to wet process production. It can also grind and stove the materials simultaneously.

Raw material ball mill working principle:

The raw material mill usually adopts two ways: edge drive and center drive. The materials enter the mill continuously and evenly through the feeder, and the motor drives the cylinder to rotate via the reducer. Firstly, the materials enter the first cabin spirally through the hollow shaft. Due to the rotation of the cylinder, frictional force and centrifugal force generate between steel balls and materials and cylinder. Under the effect of centrifugal force, the materials are brought to a certain height, and the materials scatter and drop in a material curtain form, then struck and grinded by steel balls. The sorting equipment selects qualified materials from the grinded finished product, and in the circulation grinding system, the unqualified materials are sent back to the mill and struck and grinded by the grinding media until the fineness is qualified.

2914477490.jpg

Raw material ball mill structure characteristics:

l.The classifying liner improves the grinding efficiency.

2. There is wear-resistant liner in the cylinder and have strong wear resistance.

3. The double sliding belt structure is adopted, increasing the stability and running time of the equipment.

4.Simple structure, convenient operation and strong adaptability make it can produce continuously in short time.

5.The advanced partition for powder selecting and discharge grate greatly improves the efficiency of grinding and selecting.

6.The gap between the bearing cage of sliding belt and the base is sealed with rubber and sealant. While working, the seal is strengthen to prevent the oil from leaking.

Technical parameters:

Model (m) Output (t/h) Rotate Speed (r/min) Feeding Ganularity (mm) Grinding Media Load (t) Effective Volume (m³) Motor (kW) Weight (t)
Φ2.4×7.5 21-23 20.4 ≤25 37.5 29.5 475 76
Φ2.4×10 30 20.4 ≤25 50 39 570 94
Φ2.6×8 20-24 19.57 ≤25 52 38.1 630 97
Φ2.6×9 
(closed-circuit)
42 19.57 ≤25 58 42.7 710 125
Φ3.0×9 28-32 18.3 ≤25 78 57.4 1000 150
Φ3.4×7.5 60 16.9 ≤25 80 58 1000 167
Φ3.8×7.5 90 17 ≤25 95 91.8 1600 218 
(excluding  motor)
Φ4.0×9 120-140 16 ≤25 140 106 1800 269
Φ4.6×10+3.5 190 15 ≤25 190 177 3550 352 
(excluding driving parts)
Φ4.6×10.5+3.5 210 15 ≤25 200 185 3550 358 
(excluding driving parts)

Raw mill is mainly used in grinding raw materials and final products in cement plant. It is also suitable for grinding various ores and other materials in the metallurgy, mine, chemical, construction and other industries.

Pre-sales Service:

The wide product range enables us to provide our customers with stand-alone machines or complete processing plants. Based on our customers’ request and budget, our experts make efficient, reliable solutions. Following customers’ order we produce strictly, what’s more, before placing the order every customer has the chance to visit XinXiang Great Wall (Chaeng) working machines or complete plant in the site.

To ease the trip for every visitor to China, in particular the first-time visitor, we provide FOR FREE all relevant visitor-friendly services including invitation letter preparation, hotel reservation, airport pick-up, incity transportation, and sightseeing guide, etc.

[s]HTB18139IpXXXXa3aXXXq6xXFXXXS.jpg

After-sales Service:

Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers’ plants. Necessary training about machine daily maintenance to local workers is provided also.

After-Sales department is made of well-trained employees and installation engineers, the installation engineers are special and professional members of XinXiang Great Wall (Chaeng), they are now strategically located home and abroad, working for our customers.

 

Related Products:
Request for Quotation

You can get the price list and a Great Wall representative will contact you within one business day.

Name:
Phone:
Email: *

( We will never sell or share your information with third parties. )

*Product:

Vertical Mill Ball Mill Kilns Crushers Parts

Clinker Grinding Station Cement Plant GGBS Production Line

*Question: