Home > PRODUCTS > Calcining Equipment > Lime Rotary Kiln

Lime Rotary Kiln

Lime rotary kiln is the main equipment of lime production line. It is widely used for many industries like metallurgy, chemical industry, building refractory materials, environmental protection, etc.

vip@chaeng.co

8615290747879

Get solution and support:

High Automation Level
Waste Heat be Reused Effectively
Low Energy Consumption

1.High Automation Level

The lime rotary kiln is with advanced structure. Its pre-heater with low-pressure loss can improve preheating effect efficiently. After preheating, the resolution ratio of the lime-stones can reach 20~25% when they enter the kiln. Besides, the lime-stones, with fine fraction about 10~15mm, can be used directly.

2.Waste Heat be Reused Effectively

The two sides of the reliable rotary kiln are sealed by the combined scales, which can make the air leakage coefficient less than 10%. Composite refractory materials should be used in order to reduce the loss of radiant heat.

3.Low Energy Consumption

The filling vertical cooler, round or square, can be zoned-ventilation, which can make the temperature of lime-stones in the cooler at about 80°C. As a result, it is very convenient to transport and store. It can also pre-heater the secondary air up to the temperature above 700°C, then the waste heat can be recycled to reduce energy consumption.

Model	Output (t/d)	Main Drive (r/min)	Motor (kW)	Regulating Range (r/min)	Gearbox Velocity Ratio	Weight (t)
Φ2.2×50	96	0.125-1.25	30	132-1320	157	130.71
Φ2.5×50	130	0.516-1.549	55	440-1320	99.96	167.5
Φ3×48	850	0.3309-3.309	90	100-1000	32.11	237
Φ3.2×48	1000	0.375-3.75	160	100-1000	27.469	252
Φ3.2×50	1200	0.398-3.975	190	150-1500	40.85	263
Φ3.3×52	1200	0.391-3.91	190	100-1000	27.707	280.8
Φ4×60	2500	0.396-3.96	315	100-1000	34.601	487.5
Φ4.2×60	2800	0.4165-4.165	420	100-1000	35.526	576.1
Φ4.3×62	3000	0.398-3.98	420	100-1000	35.714	598.5
Φ4.3×64	3200	0.449~4.49	450	100~1000	24.365	585
Φ4.5×66	4000	0.41~4.1	630	100~1000	34.069	710.4
Φ4.8×70	5000~5500	0.4~4.0	630	100-1000	30.876	845.3
Φ4.8×72	5000	0.403~4.03	560	100~1000	30.365	847
Φ4.8×74	5000	0.35~4	630	130~1500	42.226	841

It is widely used for many industries like metallurgy, chemical industry, building refractory materials, environmental protection, etc.

The whole kiln body is supported by the roller supporting device, and it is also equipped with thrust roller device to control the up and down movement of the kiln body.(send us a inqury for more data about it)

Related Products: